WE CHAT
139-9869-7660
Welding parts
Welding equipment: | Equipment category Specific application scope |
Argon welder | Widely used in large, medium and small parts, sheet metal chassis, sheet metal class welding.Small deformation, beautiful welding. |
Carbon dioxide gas shielded welding machine | Widely used in large, medium and small parts welding, greatly improve the welding efficiency |
Cold welding machine | Used for the repair of the out-of-tolerance of precision and small parts |
Laser welding machine | Used for precision welding of micro and small parts |
Resistance welding machine | Used for sheet metal chassis, sheet metal parts spot welding processing |
Welding quality inspection: | Welding meat defects Specific description |
Spurious welding | Spurious welding refers to the welding defects such as unfused and disconnected welds (the weld length required by the process cannot be guaranteed). |
Air breather | Piercing hole on the surfaces of welding spot |
Crack | Cracks appears in the weld. |
Slag inclusion | solid entrainment. |
Undercut | The excess between the weld and the base material is too severe |
Burning through | The base material was burnt through. |
Splashing | Metal liquid fly out and stick to the area of functional and appearance requirements. |
Over high weld is convex | The weld is too big,H values does not allow more than 3mm. |
Position deviated | Weld position is not correct. |
Coordinate with bad | plate butt joint gap is too big. |
Engineering factor:
1.Welding material shall conform to design requires and provisions of relative standards, the certificate of quality and other relevant information shall be checked.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
301 products found
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
Excellent customized Multifunctional Hand Welding Parts CNC machining clothes hanger machine parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China inverter welding machine spare welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China aluminum welding parts welding parts fabrication welding fixture front fender welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China spot welding machine parts welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding projects welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding parts in solidworks rectangular tube welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding helmet parts welding Handling tool combi welding sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding parts with sand blasting welding fixture front fender sysmetrical welding plate parts
China power coating steel welding parts fabrication welding fixture front fender welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China power coating steel welding parts fabrication welding fixture front fender welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China anodizing aluminum welding parts welding Handling tool combi welding sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China frame welding with zinc plating welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China front door welding parts welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding rear door parts frame welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding bracket parts welding Handling tool combi welding sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding plate parts numerical control machining parts processing NC machining Parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding parts with zinc plating welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding assembly parts welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding part fabrication welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China Bumper beam welding rectangular tube welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China rectangular tube welding welding Handling tool combi welding sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China heavy welding parts frame welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China car welding parts welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China a5 weld seam parts numerical control machining parts processing NC machining Parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China Chrome plating welding parts rectangular tube welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China bumper beam rear welding frame welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding Handling tool combi welding frame welding plate parts Handling tool combi welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding fixture front fender welding Handling tool combi welding sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding fixture front fender welding fixture front fender sysmetrical welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China sysmetrical parts welding welding fixture front fender sysmetrical parts welding plate parts
China welding parts in solidworks welding fixture front fender sysmetrical parts welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding parts in solidworks welding fixture front fender sysmetrical parts welding plate parts
write to us
Please send your message to us
- Tel
- *Title
- *Content
MOBILE WEB
Contact us
Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!
subscription
Contact Person
- Tel:
86-411-87552333-828
- Email:
- globalxinan@dlhshjx.cn
- Address:
- 19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.