WE CHAT
139-9869-7660
Welding parts
Welding equipment: | Equipment category Specific application scope |
Argon welder | Widely used in large, medium and small parts, sheet metal chassis, sheet metal class welding.Small deformation, beautiful welding. |
Carbon dioxide gas shielded welding machine | Widely used in large, medium and small parts welding, greatly improve the welding efficiency |
Cold welding machine | Used for the repair of the out-of-tolerance of precision and small parts |
Laser welding machine | Used for precision welding of micro and small parts |
Resistance welding machine | Used for sheet metal chassis, sheet metal parts spot welding processing |
Welding quality inspection: | Welding meat defects Specific description |
Spurious welding | Spurious welding refers to the welding defects such as unfused and disconnected welds (the weld length required by the process cannot be guaranteed). |
Air breather | Piercing hole on the surfaces of welding spot |
Crack | Cracks appears in the weld. |
Slag inclusion | solid entrainment. |
Undercut | The excess between the weld and the base material is too severe |
Burning through | The base material was burnt through. |
Splashing | Metal liquid fly out and stick to the area of functional and appearance requirements. |
Over high weld is convex | The weld is too big,H values does not allow more than 3mm. |
Position deviated | Weld position is not correct. |
Coordinate with bad | plate butt joint gap is too big. |
Engineering factor:
1.Welding material shall conform to design requires and provisions of relative standards, the certificate of quality and other relevant information shall be checked.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
301 products found
Welding service fabrication high quality parts in Dalian Hongsheng
Large frame welding processing factory
Professional welding fabrication service machining parts
Welding manufacture of large machining parts
Precision welding service fabrication parts in low price
Roller welding of large belt conveyor equipment
Distribution cabinet, distribution box precision welding processing
Precision welding fabrication parts used in different fields
Dalian hongsheng provide high precision welding service
Pressure vessel seal welding processing plant
Precision small welding parts provider in Dalian
Large equipment platform structure frame welding processing
Steel/Aluminum welding fabrication parts made in China
Dalian hongsheng supply high precision welding fabrication parts
Customized large and medium-sized structural parts welding processing
High quality welding fabrication parts made in China
China factory provide high precision metal welding parts in low price
Dalian factory provide high precision TIG/MIG welding aluminum parts
High precision welding service fabrication parts
We can provide high quality steel welding fabircation parts with excellent welding service
Hot sale welding parts provider in China
Dalian hongsheng produce high precision aluminum welding parts
Fusion welding is a processes that uses heat to join or fuse two or more materials by heating them to melting point.
Low price high quality customized fusion welding parts provider in China
Fusion welding parts with advanced welding equipment
Fusion welding parts with high precision fusion welding technology
High quality fusion welding machining parts provider in China
Arc welding uses an electrical arc to melt the work materials as well as filler material
Dalian hongsheng supply high precision fusion welding technology machining parts
High quality fusion welding fabrication parts provider in China
write to us
Please send your message to us
- Tel
- *Title
- *Content
MOBILE WEB
Contact us
Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!
subscription
Contact Person
- Tel:
86-411-87552333-828
- Email:
- globalxinan@dlhshjx.cn
- Address:
- 19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.