WE CHAT
139-9869-7660
Welding parts
Welding equipment: | Equipment category Specific application scope |
Argon welder | Widely used in large, medium and small parts, sheet metal chassis, sheet metal class welding.Small deformation, beautiful welding. |
Carbon dioxide gas shielded welding machine | Widely used in large, medium and small parts welding, greatly improve the welding efficiency |
Cold welding machine | Used for the repair of the out-of-tolerance of precision and small parts |
Laser welding machine | Used for precision welding of micro and small parts |
Resistance welding machine | Used for sheet metal chassis, sheet metal parts spot welding processing |
Welding quality inspection: | Welding meat defects Specific description |
Spurious welding | Spurious welding refers to the welding defects such as unfused and disconnected welds (the weld length required by the process cannot be guaranteed). |
Air breather | Piercing hole on the surfaces of welding spot |
Crack | Cracks appears in the weld. |
Slag inclusion | solid entrainment. |
Undercut | The excess between the weld and the base material is too severe |
Burning through | The base material was burnt through. |
Splashing | Metal liquid fly out and stick to the area of functional and appearance requirements. |
Over high weld is convex | The weld is too big,H values does not allow more than 3mm. |
Position deviated | Weld position is not correct. |
Coordinate with bad | plate butt joint gap is too big. |
Engineering factor:
1.Welding material shall conform to design requires and provisions of relative standards, the certificate of quality and other relevant information shall be checked.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
301 products found
Gas welding use fuel gases (or liquid fuels such as gasoline) and oxygen to weld or cut metals.
Pressure welding is a processes which have all in common that the components are joined by applying heat and pressure.
Dalian Hongsheng provide high precision customized welding parts
Large welding parts processing plant
Precision customized welding parts provider in China
Custom processed sheet metal artwork
Dalian Hongsheng provide high quality customized welding parts
High quality manual metal-arc welding parts made in China
Dalian Hongsheng supply high precision argon arc welding service
Large stainless steel sheet metal parts welding processing
High precision manual metal-arc welding service fabrication parts in China
Large stainless steel sheet metal welding processing plant
Dalian Hongsheng provide high quality welding fabrication parts
Dalian professional large-scale frame welding processing
Made in China high quality argon arc welding steel parts
Dalian Hongsheng provide high precision pressure welding service
Large metal sheet metal welding processing
Manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
Large structural assembly and welding plant
Dalian Hongsheng provide high precision pressuer welding fabrication parts
Customized welding fabrication service machining different types of welding parts
High-speed steel is a subset of tool steels, commonly used as cutting tool material.
Argon arc welding is a welding technique using argon as a shielding gas.
Precision welding processing of large structural parts
Manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
Manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
write to us
Please send your message to us
- Tel
- *Title
- *Content
MOBILE WEB
Contact us
Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!
subscription
Contact Person
- Tel:
86-411-87552333-828
- Email:
- globalxinan@dlhshjx.cn
- Address:
- 19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.