WE CHAT
139-9869-7660
Welding parts
Welding equipment: | Equipment category Specific application scope |
Argon welder | Widely used in large, medium and small parts, sheet metal chassis, sheet metal class welding.Small deformation, beautiful welding. |
Carbon dioxide gas shielded welding machine | Widely used in large, medium and small parts welding, greatly improve the welding efficiency |
Cold welding machine | Used for the repair of the out-of-tolerance of precision and small parts |
Laser welding machine | Used for precision welding of micro and small parts |
Resistance welding machine | Used for sheet metal chassis, sheet metal parts spot welding processing |
Welding quality inspection: | Welding meat defects Specific description |
Spurious welding | Spurious welding refers to the welding defects such as unfused and disconnected welds (the weld length required by the process cannot be guaranteed). |
Air breather | Piercing hole on the surfaces of welding spot |
Crack | Cracks appears in the weld. |
Slag inclusion | solid entrainment. |
Undercut | The excess between the weld and the base material is too severe |
Burning through | The base material was burnt through. |
Splashing | Metal liquid fly out and stick to the area of functional and appearance requirements. |
Over high weld is convex | The weld is too big,H values does not allow more than 3mm. |
Position deviated | Weld position is not correct. |
Coordinate with bad | plate butt joint gap is too big. |
Engineering factor:
1.Welding material shall conform to design requires and provisions of relative standards, the certificate of quality and other relevant information shall be checked.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
301 products found
Dalian Hongsheng provide high quality customized welding parts
Precision welding parts in Dalian Hongsheng
The company is good at TIG welding, CO2 welding, argon arc welding
Dalian Hongsheng provide high quality customized welding parts
Precision customized welding machining parts made in China
Dalian Hongsheng provide high quality customized welding parts
Customized welding parts provider in China
High precision automatic welding plant
Dalian Hongsheng provide customzied welding parts
Precision welding parts in Dalian Hongsheng
Dalian Hongsheng supply high precision customized welding parts
Precision welding fabrication parts in Dalian Hongsheng
Dalian Hongsheng provide high precision customized welding parts
Made in China high quality laser welding parts
High quality welding parts in Dalian Hongsheng
Dalian Hongsheng provide high precision welding parts
High quality customized welding fabrication parts provider in China
Dalian Hongsheng provide high quality customized metal welding parts
Professional made customized welding parts provider in China
Complex Parts Welding Processing Plant
Dalian Hongsheng provide high quality MIG and Arc welding parts
Precision customized argon arc welding parts provider in China
Dalian Hongsheng supply high precision custom made welding parts
High quality customized gas welding fabrication parts provider in China
Dalian Hongsheng provide customized welding fabrication parts
High precision OEM made arc welding service fabrication parts provider in China
Welding Processing of Stainless Steel and Other Metals
Dalian Hongsheng provide OEM made argon arc welding fabrication parts
High precision customized manual metal-arc welding parts provider in China
Dalian Hongsheng provide high quality OEM made gas welding parts
write to us
Please send your message to us
- Tel
- *Title
- *Content
MOBILE WEB
Contact us
Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!
subscription
Contact Person
- Tel:
86-411-87552333-828
- Email:
- globalxinan@dlhshjx.cn
- Address:
- 19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.