WE CHAT
139-9869-7660
Welding parts
Welding equipment: | Equipment category Specific application scope |
Argon welder | Widely used in large, medium and small parts, sheet metal chassis, sheet metal class welding.Small deformation, beautiful welding. |
Carbon dioxide gas shielded welding machine | Widely used in large, medium and small parts welding, greatly improve the welding efficiency |
Cold welding machine | Used for the repair of the out-of-tolerance of precision and small parts |
Laser welding machine | Used for precision welding of micro and small parts |
Resistance welding machine | Used for sheet metal chassis, sheet metal parts spot welding processing |
Welding quality inspection: | Welding meat defects Specific description |
Spurious welding | Spurious welding refers to the welding defects such as unfused and disconnected welds (the weld length required by the process cannot be guaranteed). |
Air breather | Piercing hole on the surfaces of welding spot |
Crack | Cracks appears in the weld. |
Slag inclusion | solid entrainment. |
Undercut | The excess between the weld and the base material is too severe |
Burning through | The base material was burnt through. |
Splashing | Metal liquid fly out and stick to the area of functional and appearance requirements. |
Over high weld is convex | The weld is too big,H values does not allow more than 3mm. |
Position deviated | Weld position is not correct. |
Coordinate with bad | plate butt joint gap is too big. |
Engineering factor:
1.Welding material shall conform to design requires and provisions of relative standards, the certificate of quality and other relevant information shall be checked.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
301 products found
OEM made stainless steel fabrication parts in Dalian Hongsheng
Precision welding fabrication parts provider in China
Dalian Hongsheng provide high quality welding parts
Dalian Hongsheng provide high quality welding parts
High quality welding parts in China
Dalian Hongsheng provide high quality welding parts
Precision customized welding parts in Dalian Hongsheng
Dalian Hongsheng provide high quality OEM made welding parts
Dalian Hongsheng provide high quality welding products
High quality different kinds of welding parts in Dalian Hongsheng
Customized welding parts in Dalian Hongsheng
Precision welding parts in Dalian Hongsheng
High quality OEM made welding parts made in China
Precision customized welding parts in Dalian Hongsheng
Dalian Hongsheng provide high precision welding parts
Precision customized welding parts in Dalian Hongsheng
Dalian Hongsheng provide high quality welding parts
Precision customized welding parts in Dalian Hongsheng
Dalian Hongsheng provide customzied welding parts
Precision customized welding parts in Dalian Hongsheng
Dalian Hongsheng provide high precision customzied welding parts
High quality customized welding parts in Dalian Hongsheng
Dalian Hongsheng provide high quality welding product
Mainly for iron, stainless steel, aluminum and other materials welding
Precision welding parts in Dalian Hongsheng
Dalian Hongsheng provide high quality welding fabrication parts
Precision customized welding fabrication parts
write to us
Please send your message to us
- Tel
- *Title
- *Content
MOBILE WEB
Contact us
Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!
subscription
Contact Person
- Tel:
86-411-87552333-828
- Email:
- globalxinan@dlhshjx.cn
- Address:
- 19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.