WE CHAT
139-9869-7660
Welding parts
Welding equipment: | Equipment category Specific application scope |
Argon welder | Widely used in large, medium and small parts, sheet metal chassis, sheet metal class welding.Small deformation, beautiful welding. |
Carbon dioxide gas shielded welding machine | Widely used in large, medium and small parts welding, greatly improve the welding efficiency |
Cold welding machine | Used for the repair of the out-of-tolerance of precision and small parts |
Laser welding machine | Used for precision welding of micro and small parts |
Resistance welding machine | Used for sheet metal chassis, sheet metal parts spot welding processing |
Welding quality inspection: | Welding meat defects Specific description |
Spurious welding | Spurious welding refers to the welding defects such as unfused and disconnected welds (the weld length required by the process cannot be guaranteed). |
Air breather | Piercing hole on the surfaces of welding spot |
Crack | Cracks appears in the weld. |
Slag inclusion | solid entrainment. |
Undercut | The excess between the weld and the base material is too severe |
Burning through | The base material was burnt through. |
Splashing | Metal liquid fly out and stick to the area of functional and appearance requirements. |
Over high weld is convex | The weld is too big,H values does not allow more than 3mm. |
Position deviated | Weld position is not correct. |
Coordinate with bad | plate butt joint gap is too big. |
Engineering factor:
1.Welding material shall conform to design requires and provisions of relative standards, the certificate of quality and other relevant information shall be checked.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
2.Welder shall pass the examination, to check the welder's corresponding welding conditions and the date of assessment.
3.Class I II welds shall be tested for flaw detection and conform to design requires, construction and acceptance specifications. Providing reports of flaw detection on welds.
4.Uniform appearance of the weld seam, smooth transition between welds and welding toe, Cleaning up the welding spatter.
5.I, II class welds shall not exist the defective situation of incompletely filled weld, undercuts, non-shrinkage, and crack, blowholes and arc strike on the surface.
301 products found
China numerical control machining welding fixture front fender sysmetrical parts welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China numerical control machining welding fixture front fender sysmetrical parts welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China parts processing welding fixture front fender sysmetrical parts welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China CNC lathe turning parts welding fixture front fender sysmetrical parts welding plate parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding Handling tool combi welding welding fixture front fender sysmetrical parts welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China heavy welding parts Chrome plating welding parts bumper beam rear welding car welding parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding assembly parts welding part fabrication heavy steel welding bumper beam welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China front door welding parts welding rear door welding bracket parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding helmet parts welding parts with sand blasting power coating steel welding parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China inverter welding machine spare parts aluminum welding spot welding machine parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding cart parts welding plastic body arc welding machine tig welding spare parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding motorcycle welding spare parts welding machining welding cylinder parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China welding accessories stainless steel Welding accessories tig welding accessories professional welding parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China high quality welds parts numerical control machining parts processing NC machining Parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China sysmetrical parts welding Chrome plating welding parts welding fixture front fender welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
High quality a5 weld seam parts car welding parts heavy welding parts
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
High quality welding bracket parts welding rear door parts front door welding parts frame welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
High quality welding bracket parts welding rear door parts front door welding parts frame welding
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
Customized high demand OEM stainless steel welding parts laser welding machining spare parts for auto industrial
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
Customized high demand OEM stainless steel welding parts laser welding machining spare parts for auto industrial
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
Customized high demand OEM stainless steel welding parts laser welding machining spare parts for auto industrial
MOQ: 1 piece
Unit Price: US $ 1.5 / piece
China supplier high precision for welding plastic body parts welding cable parts welding cart parts
China professional customized welding machining spare parts motorcycle welding spare parts
Processing method CNC machining
Processing method CNC machining
Processing method CNC machining
MOQ: 1 piece
Unit Price: US $ 7 / piece
cnc welding parts Hot sale welding parts Chinese manufacturer high quality welding products ISO 9001 customized service
customized stainless steel 316/304/303 cnc aluminum 5052/6061/7075 auto profile parts with turning welding anodizing cnc lathe
Chinese manufacture high quality welding products ISO 9001 customized service Hot sale welding parts
MOQ: 1 piece
Unit Price: US $ 10 / piece
Chinese manufacture high quality welding products ISO 9001 customized service Hot sale welding parts
MOQ: 1 piece
Unit Price: US $ 10 / piece
Hot sale high strength welding spare parts Chinese manufacture high quality welding parts ISO 9001 customized service
MOQ: 1 piece
Unit Price: US $ 10 / piece
high strength welding parts hot sale ISO 9001 customized service Chinese manufacture high quality welding parts
write to us
Please send your message to us
- Tel
- *Title
- *Content
MOBILE WEB
Contact us
Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!
subscription
Contact Person
- Tel:
86-411-87552333-828
- Email:
- globalxinan@dlhshjx.cn
- Address:
- 19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.